24/7Dallas, TXUnder 30 min
We come to you in Keller with EV-rated tooling, 25 to 45 minutes typical, 24 hours a day. We press the broken stud out and a new one in at the roadside, then torque the wheel to specification.
Keller is almost entirely residential and driveway-based. Calls are 12V failures on low-mileage second cars and slow leaks found on a Saturday morning. When the problem is a snapped wheel stud, Keller drivers do not need a tow truck and a day without their car — they need someone who can fix it in the spot the car stopped in.
People think a broken stud means a tow and a shop day. On most EV hubs it is a roadside repair if the technician carries the right press tooling and the correct stud. We press the broken stud out and a new one in at the roadside, then torque the wheel to specification.
We run US-377, FM-1709 and Keller Parkway and get called to Keller Town Center, the Keller Pointe and Bear Creek Park constantly, so a Keller dispatch is not a technician following a map for the first time. Typical arrival window is 25 to 45 minutes, 24 hours a day, and you get a flat quote before a truck is assigned. Call or text (945) 383-4744.
Typical time on scene: 45 to 75 minutes.
Pull the wheel and confirm how many studs are compromised and whether the hub face is damaged.
Press the broken stud out and draw the replacement in fully seated, without heating or hammering the hub.
Refit the wheel, torque in sequence to the manufacturer figure, and re-check after the wheel has settled.
Family households in Keller ISD with one EV used for school runs and errands — the exact usage pattern that leaves a 12V undercharged.
The locations repeat. Most of our Keller broken lug stud repair calls come from Keller Town Center, the Keller Pointe, Bear Creek Park, Hidden Lakes and the 377 retail corridor, plus the shoulder and ramp work along US-377, FM-1709, Keller Parkway and Rufe Snow Drive. Driving on a wheel with a missing stud loads the remaining ones unevenly, and on a vehicle as heavy as an EV that is how you lose a second stud at speed.
Long private driveways and narrow residential streets are the norm. Working in the driveway is standard here rather than an exception.
Every Keller call follows the same sequence, whether you are in a driveway in a quiet subdivision or on a shoulder with traffic going past at seventy. Time on scene for a snapped wheel stud is typically 45 to 75 minutes, on top of the 25 to 45 minutes it takes us to reach you.
We press the broken stud out and a new one in at the roadside, then torque the wheel to specification. Nothing gets improvised, and nothing gets torqued by feel — every wheel that comes off a car in Keller goes back on to the manufacturer's figure.
A general tow operator solves one problem: moving the vehicle somewhere else. That is the wrong answer for a snapped wheel stud, because studs snap when they have been over-torqued at a tire shop, corroded over years, or fought with a bad extraction attempt — and the repair itself takes less time than the tow would.
We are a private, Texas-owned EV roadside company operating since 2014, with EV-rated jacks and pucks, EV-specific tooling and technicians who work on electric vehicles all day. Keller sits inside our core Tarrant County service area, dispatched from our Dallas-area base, which is how the 25 to 45 minutes window is realistic rather than aspirational.
Pricing is flat and quoted on the first call. Payment is settled on scene by card, Apple Pay, Google Pay, Zelle, Venmo or CashApp, and you get a digital receipt by text — which matters if you are expensing it or filing with an insurer.
Same trucks, same 25 to 45 minutes window. Pick the problem you actually have.
Call or text (945) 383-4744, or send the form and dispatch will call you back.
For 24/7 emergencies, call us directly. Otherwise this form goes straight to dispatch.
